2 Port Antenna RFID Reader (Impinj Speedway)

Description  

This 2 Port RFID Reader is a small, high performance, multiprotocol, networked UHF RAIN RFID reader.  It is a low profile enclosure with both read and write capability.  With the multipurpose USB Ports, an SD card slot, HDMI video output port, and isolated general purpose I/O ports allow the reader to support a wide variety of applications for example, in-vehicle services, mobile asset management and the outdoor sheltered applications.

Key Technical Data

• Dimensions: 87 mm L x 80 mm W x 24 mm H
• Weight :0.4 lbs. (0.1 7 kg)
• Computer Interface:
  • RJ45 (10/100 Base-T Ethernet)
  • USB Type B (console, memory stick, and RNDIS port),
  • USB Type A (accessory port),
  • GPIO interface 8-Pin Terminal Block (GPIO interface),
  • Female SMA (optional WiFi antenna) 5 mm x 2.1 mm coaxial jack (DC input),
  • Micro SD Card Interface,
  • Micro HDMI Video Port
• RF Interface: External Antenna Interface two RP-SMA connectors
• RF Output Power:  0 dBm to 30 dBm (1 W)
• Operating frequency: 920-925  MHz
• Supported transponders: EPCglobal Gen2 (ISO 18000-6C), EPC Gen 2V2 ISO 18000-63, ISO 18000-6B (optional), IP-X (optional), AEI ATA (optional)
• Reading distance typical: Up to 9 m with with 9dBiC or 6dBiL antenna with tag has -15 dBm receive sensibility.
• Performance tag read rate: Max Tag Read Rate Up to 750 tag reads per second
• Power Supply: External DC Power 5 VDC +/- 0.25 V, Maximum DC power: 15 W
• Operating temperature: -40 C to +60
• Storage temperature:  -40 C to +85 C
• Humidity 5% to 95%, non-condensing
• Standard conformity:
  • FCC 47 CFR Ch. 1 Part 15
  • Industrie Canada RSS-21 0;
  • ETSI EN 302 208 v3.1.1 (RED 2014/53/EU) 
  • Other ROHS Compliant, IEC 60950-1(ed.2), CA-10430-UL