Identify RFID Thailand

Impinj Speedway® Revolution RFID Reader Featured

RFID Reader

Application environments are dynamic. Everything from RF interference, tag quantity, and ambient RF noise to building materials near an RFID installation affect system performance.

Most users configure their RFID readers for worst case scenarios, often compromising best performance in the process.With its innovative Autopilot features, Impinj's Speedway® Revolution RFID reader delivers peak performance—all day, every day.

With Autopilot, a set of unique firmware features work together to automatically optimize the RFID reader's operation for its environment:

          - Autoset—continuously optimizes the reader's configuration for the best, most reliable performance

  • - Low duty cycle—reduces RF interference, power consumption, and energy costs
  • - Dynamic antenna switching—improves throughput and helps the reader work more efficiently

Impinj Speedway Revolution RFID reader also delivers increased application flexibility via support for Power over Ethernet (PoE), which simplifies deployment and dramatically reduces cost by eliminating the need for AC outlet installation at read points. 

And this revolutionary RFID reader improves upon the advanced hardware capabilities that made the original Speedway the reader of choice for many demanding customers—capabilities such as best receive sensitivity, interference rejection, and item-level carrier cancellation.  

Impinj, defining the future of RFID, where superior performance comes easy.

Impinj Speedway® Revolution RFID Readers At A Glance

  Impinj Speedway R420  Impinj Speedway R220

Air Interface Protocol

EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C

Performance    

 Includes all possible performance configurations and functionality to deliver peak performance for even the most challenging of applications Intended for less demanding applications. Does not support the maximum throughput available on R420 including Max Throughput FM0, Hybrid, Max Miller and Autoset Single Reader

Supported Regions and Geographies
  1. US, Canada, and other regions following US FCC Part 15 regulations
  2. Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
  3. Brazil, Uruguay
  4. Pending regulatory approval—Australia, China, Hong Kong, India, Malaysia, Singapore, Taiwan, Thailand, and Vietnam

Antennas

 4 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC) 2 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)

Transmit Power
  1. +10.0 to +30.0 dBm (PoE) 
  2. +10.0 to +32.5 dBm1 (external universal power supply) 

Note 1: Speedway Revolution requires professional installation, may only be operated with Impinj-approved antennas, and can radiate no more than 36 dBm EIRP per FCC Part 15.247 regulations. Other regulatory regions have similar restrictions. Consult the Installation and Operations Guide to learn more.

Max Receive Sensitivity

-82 dBm

Max Return Loss

10 dB

Application Interface

EPCglobal Low Level Reader Protocol (LLRP) v1.0.1

Network Connectivity

10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)

Cellular Connectivity*
  1. Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)
  2. Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)

(* Available through Impinj-authorized partners)

IP Address Configuration

 DHCP, Static, or Link local Addressing (LLA) with Multicast DNS (mDNS)

Time Sychronization

Network Time Protocol (NTP)

Management Interfaces
  1. Impinj Web Management UI
  2. Impinj RShell Management Console using serial management console port, telnet or SSH
  3. SNMPv2 MIBII
  4. EPCglobal Reader Management v1.0.1
  5. Syslog

Reliable Firmware Upgrade
  1. Dual image partitions enable smooth transition to new firmware while the reader is still operating 
  2. Scalable upgrade mechanism enabling simultaneous scheduled upgrades of multiple reader
  3. USB Flash Drive
  4. Impinj Web Management UI
      

Management Console
  1. RS-232 using a standard Cisco-style management Cable (DB-9 to RJ-45) 
  2. Baud rate: 115200; Data: 8 bit; Parity: none; Stop: 1 bit; Flow control: none 

USB
  1.  USB 1.1 Device (Type B) and Host (Type A) ports 
  2.  USB Virtual COM Serial Port and USB drive support for embedded applications 

GPIO
  1. 4 inputs, optically isolated, 3–30V
  2. 4 outputs, optically isolated, 0– 30V, non-isolated 5V, 100 mA supply (DB-15) 

Power Sources
  1. Power over Ethernet (PoE) IEEE 802.3af
  2. +24 VDC @ 800 mA via external universal power supply with locking connector—sold separately 

Power Consumption

 

Idle

Typical

LDC

PoE at +30 dBm

3 W

11.5 W

6 W

Power Supply at +30 dBm

3 W

13.5 W

6 W

Power Supply at +32.52 dBm

3 W

15 W

6 W

 

 

Environmental Sealing

IEC IP52

Shock and Vibration

 Mil-Std-810G Certified

Operating Temperature

-20 ºC to +50  ºC

Humidity

5% to 95%, non-condensing

Dimensions (H x W x D)

7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)

Weight

1.5 lbs (0.68kg)

  

RoHS

Compliant to European Union directive 2002/95/EC

 

Published in UHF Reader
Tagged under

Related items (by tag)

Related Video

More in this category: « UHF Hand Held RFID Reader Impinj Speedway® xPortal™ RFID Reader »
back to top
You are here: Home Products RFID Reader Passive Reader UHF Reader Impinj Speedway® Revolution RFID Reader

Latest News

Feature

Popular

Support center

99/28 Software Park, 7th fl Changwattana Road Pakkred, Klong Grua Nonthaburi 11120 Thailand

  • Tel: 662-582-3714-5
  • Fax: 662-962-0816
  • Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
  • Website: www.id.co.th