Identify has employed UHF passive RFID to monitor temperature of product. Using UHF passive RFID, it does not need any battery on RFID tag so it does not have specific lifetime. The accuracy of the temperature is estimated at +/- 1C. This solution can enhance the efficiency in cold logistic to automate temperature with lower cost.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2021-08-06 15:14:502021-08-07 10:17:07Identify has developed passive RFID solution for temperature monitoring.
Identify has employed RFID technology for the operation in a blood bank. Each bag of blood is attached with RFID tag. The tag is IP 68 and can withstand -40 C temperature. A UHF RFID reader is embedded in the checking station. When the container with blood bag is placed on the station, the ID of each bag in the container will be captured automatically without opening the container box. This will increase the efficiency and reduce the chance of touching the blood bag.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2021-07-02 16:24:442021-08-06 15:04:38RFID – Blood Bank
Identify has implemented RFID Self Service Weight Station. The solution is using UHF RFID Readers to automatic identify truck and its trailer by reading their RFID tags on truck and trailer simultanerously. Additionally the hand-free switch is also employed in order to reduce Covid-19 contamination in touching the screen.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2021-06-23 17:05:092021-08-06 15:04:57Implementation RFID Self Service Weight Station
ECCO+ is a hybrid AutoID technology which provides not only reading of barcode but also RFID technology. The device is available in the following variants:
pure 1D/2D barcode scanner
pure HF/UHF reader
hybrid solution combining barcode and RFID
With common communication interfaces like USB, Bluetooth and Wifi, this mobile reader can be used in different fields of applications such as logistics, asset tracking, healthcare and etc.
Key Technical Data
CPU: ARM9, 400 Mhz
Memory: 128 MB RAM, 1 GB Flash
Programming: ECLIPSE IDE for C/C++
Support OS: Win 7/Win 8/Win 10 (32 and 64 bits)/ Server 2003/2000
The Tag Master LR-6HD is an active RFID reader for heavy-duty. It is an all in one reader with integrated antenna. This RFID reader is developed for applications where a higher environmental classification is required, for example in railway solutions where track-side mounting is required. The heavy-duty readers are robust and designed for very tough conditions. The readers are designed to withstand vibrations as well as being highly resistant to electrical interference. Heavy-duty also means that the readers are built to withstand climatic conditions such as rain, ice and high or low temperatures.
The reader’s specification has been matched to meet the needs of the rail industry and the LR-6HD can identify ID-tags at passage speeds of up to 400 km/h and up to 10 metres reading distance.
Key Technical Data
Dimensions: 290 x 165 x 55 mm Dimensions 290 x 165 x 56 mm (11.42 x 6.50 x 2.21 inch)
Power supply: 10–30 VDC Power supply 10 to 30 VDC (NOM 24 V)
Power consumption 5 W (max 15 W) Power consumption 5 W (max 15 W)
Operating frequency: 2.435 to 2.465 GHz Read range up to 10 metres* (33 ft)
RF Power Output: Output power 10 mW
Reading distance typical: Up to 10 metres
Encapsulation: IP66
Operating temperature: -40°C (-40°F) to +70°C (+158°F)
Standard conformity: CE Certificate according to R&TTE-Directive 1999/5/EC, FCC M39LRXX +applicable railway standards
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-28 13:45:262020-09-18 08:52:13Tag Master Heavy Duty Active RFID Reader
Identify has proposed the on-metal outdoor RFID label for gas cylinder tracking. After using for several months, the label has been proved to be able to in outdoor environment successfully.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-27 11:22:482020-09-18 08:53:52Proven usage, on metal outdoor RFID label
This RFID antenna is specially designed for forlift application. It comes in compact size with high robustness and endurance while delivering high reading ability.
The MarkTag MeM is an active RFID tag which is the ideal choice of ID-tag for applications when a wider and longer reading range is needed. The active RFID Tag has a great angel of reading by using a state of the art antenna technology.
This RFID tag is a read-only 2.45 GHz RFID tag. Each RFID tag has its own ID-tag which has a pre-programmed 8-digit unique identity code. It also has a large 32 bit checksum that virtually eliminates the risk of incorrect tag reads even with several ID-tags identified simultaneously. The RFID tag is battery powered, keeping the tag alert, for instantaneous response to the reader signal. The lifetime of the RFID tag is fully predictable +6 years, independent of the number of times it is being identified
Key Technical Data
Dimensions: 41x41x13 mm (1.61×1.61×0.51 in)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range: Up to 10 metres up to 14 metres with LR-6 XL reader (46ft)
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures: Operating temperatures -20 °C (-4 °F) to +70 °C (+158 °F)
Encapsulation: Material Robust polymers
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature
Colour: Two tones of grey
Ingress Protection: IP 54
Certifications:
Certifications CE Certificate according to R&TTE-Directive 1999/5 /EC, Annex IV, Health: 1999/519/EC, EL.Safety: EN 60950, EMC: EN 301489-3:2000, Radio: EN 300 440:2001 RoHs
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-24 11:37:282020-09-18 08:57:19Active RFID Tag (Mark Tag MeM)
The MarkTag HD is an active RFID tag which is designed for our door environement. This RFID tag is the standard choice for applications where there is no need to write information to the ID-tag. The MarkTag Outdoor is made for outside mounting on a vehicle/object and can be mounted directly on to metal surfaces. The RFID tag is robust, vibration resistant, waterproof and UV stable.
The RFID tag has a pre-programmed 8-digit unique identity code from factory that comprises a 32 bit checksum for automatic verification. This eliminates substitution errors even with several ID-tags identified simultaneously. . The lifetime of the active RFID tag is predictable +6 years independently to the number of reads.
Key Technical Data
Dimensions 91 x 59 x 8 mm (3.6 x 2.3 x 0.3 inch)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range : Up to 10 metres
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures -20°C (-4°F) to +85°C (+185°F)
Encapsulation: Encapsulation Robust Polymer
Colour: Black
Ingress Protection: IP67
Certifications:
CE Certificate according to R&TTE-Directive 1999/5/EC, Annex IV, Health: 1999/519/EC, El.Safety: EN 60950, EMC: EN 301489-3:2000, Radio EN 300 440:2001
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-20 22:49:452020-09-18 08:58:48Active RFID Tag (Mark Tag HD)
The MarkTag Classic is an active RFID tag which is designed to work with Tag Master LR6 active RFID reader. This RFID tag is the ideal choice of ID-tag in parking and access control applications that ask for hands-free access. The MarkTag Classic is a read-only 2.45 GHz RFID tag. Each ID-tag has a pre-programmed 8-digit unique identity code. A 32 bit checksum ensures a very safe read. In combination with a random reflection of the RFID reader signal, this eliminates substitution errors even with several ID-tags identified simultaneously. The RFID tag is battery powered, keeping the ID-tag alert, for instantaneous reflection of the reader signal. The lifetime of the active RFID tag is predictable +6 years independently to the number of reads.
Key Technical Data
Dimensions 86 x 54 x 3 mm (3.39 x 1.612.13 x 0.12 inch)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range : Up to 6 metres with LR-6 reader
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures -20°C (-4°F) to +85°C (+185°F)
Encapsulation: IP54
Colour: Grey scale
Certifications:
CE Certificate according to R&TTE-Directive 1999/5/EC, Annex IV, Health: 1999/519/EC, El.Safety: EN 60950, EMC: EN 301489-3:2000, Radio EN 300 440:2001
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-18 11:50:262020-09-18 09:00:14Active RFID Tag (Mark Tag Classic)