Archive for month: June, 2019
4 Port Antenna RFID Reader [FEIG Reader]
Description
This UHF Long Range Reader is a high performance long range RFID reader that can be used in different kind of applications. The RFID reader has a protection against fault conditions like antenna shortcut, antenna mismatching and electrostatic discharge. Its robust aluminum die case housing is designed for usage in rough and industrial environments. With the additional connector sealing cap, the reader protection can increase enclosure rating to IP 64. The reader is also equipped with antenna port indication via 4 LEDs including green for active antennas, read events in blue and possible antenna mismatching in red.
Key Technical Data
- Dimensions: 260 mm x 157 mm x 65 mm
- Weight : 1.800 g
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- RS232,
- USB
- GPIO interface: 2 Output , 1 Input, 1 Relay
- RF Interface: External Interface Four SMA-Female (50 Ohm)
- RF Output Power: 100 mW to max. 1 W
- Operating frequency: 920-925 MHz
- Supported transponders: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C (Upgrade Code)
- External DC Power: 24 V DC (± 10 %)
- Operating temperature: -25 °C to 55 °C
- Storage temperature: -25 °C to 85 °C
- Environmental Sealing IP 53, IP 64 (with protection cap)
- Vibration: EN 60068-2-6: 10 Hz to 150 Hz: 0,075 mm / 1 g
- Shock : EN 60068-2-27, Acceleration: 30 g
- Humidity 5 % to 95 % (non-condensing)
- Standard conformity:
- EN 302 208
- FCC 47 CFR Part 15
- IC RSS-GEN, RSS-210
- EN 301 489
- Low Voltage EN 60950
- Human Exposure EN 50364
4 Port Antenna RFID Reader [Impinj Speedway]
Description
Impinj Speedway RFID Reader has a compact form factor and supports power over Ethernet (PoE). With its POE connectivity, it will simplify the deployment and dramatically reduces cost by eliminating the need for AC outlet installation at read points. Speedway RFID reader delivers the full 30 dBm of transmit power and the highest read performance. Its dynamic antenna switching improves throughput and helps the reader work more efficiently. Speedway RFID reader senses when tags are in the field and automatically focuses more time on the antennas with the largest tag populations in view.
Key Technical Data
- Dimensions: 19 (H) x 17.5 (W) x 3 (D) cm
- Weight : 1.5 lbs
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- Management Console RS-232 using a standard Cisco-style management cable (DB-9 to RJ-45)
- USB Type B
- USB Type A (host accessory port)
- GPIO interface : GPIOs; 4 Inputs & 4 Outputs12-Pln, two-row Terminal Block
- RF Interface: External Interface Four RP-TNC connectors
- RF Output Power: +10.0 to +30.0 dBm (PoE) and +10.0 to +32.5 dBm (external universal power supply)
- Operating frequency: 920-925 MHz
- Supported transponders: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
- Power Supply: Power over Ethernet (PoE) IEEE 802.3af
- External DC Power: 24 VDC @ 800mA via external universal power supply
- Operating temperature: -20 ºC to +50 ºC
- Environmental Sealing IEC IP52
- Shock and Vibration Mil-Std-810G Certified
- Humidity: 5% to 95%, non-condensing
- Standard conformity:
- RoHS Compliant to European Union directive 2002/95/EC
4 Port Antenna RFID Reader [ThingMagic IZAR]
Description
ThingMagic IZAR is a compact, programmable, 4-port RAIN UHF RFID network-attached reader with both read and write capability. The reader supports the entire suite of RAIN UHF RFID tag functionality, including Gen2V2 security. Optional, non-RAIN tag protocols are also available, including ISO 18000-6B, IP-X and AEI ATA (transportation). Multiple Data Interfaces Control and data gathering connections to ThingMagic IZAR can be made over both LAN and client USB interfaces. Other interfaces can also be supported by adapters connected to the USB host interface, including WiFi, Bluetooth, and serial connections.
Key Technicaส Data
- Dimensions: 194 mm / 7.6 in. x W: 139 mm / 5.5 in. x H: 33.6 mm / 1.3 in
- Weight : 1.51 lbs. (0.7 kg)
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- USB Type B (client console, memory stick, and RNDIS port
- USB Type A (host accessory port)
- GPIO interface : GPIOs; 4 Inputs & 4 Outputs12-Pln, two-row Terminal Block (GPIO Interface)
- Micro SD Card Interface (Future use) Micro HDMI Video port (Future use)
- RF Interface: External Interface Four RP-TNC connectors
- RF Output Power: 0 to +31.5 dBm in 0.01 dBsteps
- Operating frequency: 920-925 MHz
- Supported transponders: EPC Gen 2V2 ISO 18000-63 ISO 18000-6B (optional) IP-X (optional) AEI ATA (optional)
- Reading distance typical: Max Tag Read Distance Over 9 m (30 feet) with 9dBiC or 6dBiL antenna
- Performance tag read rate: Max read 750 tag reads per second
- Power Supply: Power Over Ethernet 802.3af, Supports 100m cable
- External DC Power: DC 9-30V
- Operating temperature: -40°C to +60°C
- Storage temperature: -40°C to +85°C
- Humidity: 5% to 95% (non-condensing)
- Standard conformity:
- FCC 47 CFR Ch. 1 part 15
- Industry Canada RSS-21 0
- ENSI EN 302 208 v3.1.1 (RED 2014/53/EU)
- ROHS compliant IEC 60950-1(ed.2) CA-10430-UL
4 Port Antenna RFID Reader (M6)
Description
The Mercury®6 (M6) is a low profile, high-performance 4-port RFID reader designed for both indoor and outdoor applications. Driven by ThingMagic’s powerful Mercury6e UHF RFID reader module, the M6 Power over Ethernet (PoE) allows for flexible, low cost, installations.
Key Technical Data
- Dimensions: 19 cm L x 17.8 cm W x 3.4 cm H
- Weight : 2 lbs (0.9 kg)
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- USB Type B (console port)
- USB Type A (accessory port)
- HD15, GPIO interface : GPIOs; 4 Inputs & 4 Outputs
- RF Interface: External Antenna Interface Four RP-TNC connectors RF
- RF Output Power: adjustable from 5 dBm to 31.5 dBm1 (1.4W) with +/-0.5 dBm accuracy above +15 dBm
- Operating frequency: 920-925 MHz
- Supported transponders: EPCglobal Gen2 (ISO 18000-6C) with DRM ISO 18000-6B (optional)
- Reading distance typical: 9 m with 6 dBi antenna (36 dBm EIRP), with tag has -15 dBm receive sensibility.
- Performance tag read rate: 750 tags/second using high-performance settings
- Power Supply: Power Over Ethernet 802.3af in both modes A and B (Supports 100m cable)
- External DC Power: 10- 30 VDC supply voltage Maximum DC power: 15 W
- Operating temperature: -20C to +50C
- Storage temperature: -40C to +85C
- Humidity: 5% to 95%, non-condensing
- Dust and water immunity :IP52
- Standard conformity:
- Safety IEC 60950-1 (ed.2)
- US-17669-UL
- RoHS compliant per EU directive 2002/95/ EC
2 Port Antenna RFID Reader (Impinj Speedway)
Description
This 2 Port RFID Reader is a small, high performance, multiprotocol, networked UHF RAIN RFID reader. It is a low profile enclosure with both read and write capability. With the multipurpose USB Ports, an SD card slot, HDMI video output port, and isolated general purpose I/O ports allow the reader to support a wide variety of applications for example, in-vehicle services, mobile asset management and the outdoor sheltered applications.
Key Technical Data
- Dimensions: 87 mm L x 80 mm W x 24 mm H
- Weight :0.4 lbs. (0.1 7 kg)
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- USB Type B (console, memory stick, and RNDIS port),
- USB Type A (accessory port),
- GPIO interface 8-Pin Terminal Block (GPIO interface),
- Female SMA (optional WiFi antenna) 5 mm x 2.1 mm coaxial jack (DC input),
- Micro SD Card Interface,
- Micro HDMI Video Port
- RF Interface: External Antenna Interface two RP-SMA connectors
- RF Output Power: 0 dBm to 30 dBm (1 W)
- Operating frequency: 920-925 MHz
- Supported transponders: EPCglobal Gen2 (ISO 18000-6C), EPC Gen 2V2 ISO 18000-63, ISO 18000-6B (optional), IP-X (optional), AEI ATA (optional)
- Reading distance typical: Up to 9 m with with 9dBiC or 6dBiL antenna with tag has -15 dBm receive sensibility.
- Performance tag read rate: Max Tag Read Rate Up to 750 tag reads per second
- Power Supply: External DC Power 5 VDC +/- 0.25 V, Maximum DC power: 15 W
- Operating temperature: -40 C to +60
- Storage temperature: -40 C to +85 C
- Humidity 5% to 95%, non-condensing
- Standard conformity:
- FCC 47 CFR Ch. 1 Part 15
- Industrie Canada RSS-21 0;
- ETSI EN 302 208 v3.1.1 (RED 2014/53/EU)
- Other ROHS Compliant, IEC 60950-1(ed.2), CA-10430-UL
Integrated Antenna RFID Reader
Description
The reader is an easy to install, unobtrusive, integrated 2-port reader/antenna. It supports Power-over-Ethernet (PoE) and has Wi-Fi option which is allowed for single cable installation. It is designed to blend with corporate IT infrastructures and office layouts, and commercial environments.
Key Technical Data
- Dimensions: 26 cm L x 26 cm W x 7.6 cm H
- Weight 4.5 lbs (2.0 kg)
- Computer Interface:
- RJ45 (10/100 Base-T Ethernet)
- USB Type B (console port)
- USB Type A (accessory port)
- GPIO interface
- Female SMA (optional WiFi antenna)
- Wireless Internal 802.11 b/g (optional)
- RF Interface: Internal antenna with 8,5 dBiC, ge n of +1 dBi and external RP-TNC connector
- Power Supply: Power Over Ethernet Power over Ethernet 802.3af (Supports 100m cable)
- External DC Power 10- 30 VDC supply voltage. Maximum DC power: 15 W
- Operating frequency: 920-925 MHz
- Supported transponders: EPCglobal Gen2 (ISO 18000-6C)
- RF Power Output: Separate read and write levels, adjustable from 5 dBm to up to 30.0 dBm (1.0 W) into integrated antenna with +/-0.5 dBm accuracy above +15 dBm
- Reading distance typical: Up to 9 m with Integrated antenna
- Performance tag read rate: 750 tags/second using high-performance settings
- Operating temperature: –20 °C up to + 50 °C
- Storage temperature: –40 °C up to +85 °C
- Humidity: 5% to 95% non-condensing
- Standard conformity:
- Regulatory FCC 47 CFR Ch. 1 Part 15
- Industrie Canada RSS-21 0
- ETSI EN 302 208
Other ROHS Compliant IEC 60950-1(ed.2) US-17668-UL
Long Range Reader : USB RFID Reader
USB RFID Reader
Description
This reader supports applications that require desktop reading and writing of EPC Global Gen2 tags as well as other protocols such as ISO18000-6B, IPx and AEI ATA through additional license. It is controlled and powered by a host PC or laptop through a USB interface, and, in addition, supports autonomous operation.
Key Technica Data
- Dimensions: 97 mm x 61 mm x 25 mm
- Computer Interface: USB
- RF Interface: Internal antenna with an average gain of +1 dBi and external RP-SMA antenna connector
- DC Power: 4.5 to 5.5 VDC from USB cable
- Operating frequency: 920-925 MHz
- Supported transponders: EPC Gen2V2, ISO18000-63 standard, ISO18000-6B, IPx, AEI ATA are available through additional license
- RF Power Output: Adjustable from -5 dBm to 30 dBm* (1W), +/- 1.0 dBm accuracy with +20dBm default
- Reading distance typical: Up to 4 feet (1.2m) depending on tag sensitivity and orientation with internal antenna
- Performance tag read rate: 50 tag/second
- Operating temperature: –40 °C up to +60 °C
- Storage temperature: –40 °C up to +85 °C
- Standard conformity:
- FCC 47 CFR Ch. 1 Part 15
- Industrie Canada RSS-21 0
- ETSI EN 302 208 v3.1.1 (RED 2014/53/EU)
- Safety IEC 60950-1 (ed.2) US-17650-UL Power
Case: RFID Tunnel System
CHALLENGE: REDUCE SCANNING TIME
One of the most promising areas of using RFID technology is to be able to read multiple tags in one time. Many companies would like to have their goods with UHF tags can be scanned automatically without wasting time on individual scanning. We have developed RFID Tunnel System to achieve this objective and our RFID tunnel has been installed in LF logistics and ICC International PLC.
SOLUTION
Our RFID tunnel is embedded with a RFID reader, RFID antenna and a touch screen PC. The list of delivery item is downloaded into our RFID tunnel system. When items with UHF RFID label pass through the tunnel, our system will read and verify if the items are matched with the delivery note or not. Any mis-match or expired products will be highlighted on the touch screen in order avoid the mistake in the delivery. This process can be done automatically without manual scanning.
RESULTS
- Eliminate manual counting or scanning
- Minimizing the risk of delivery wrong or expired products.
- Increase the speed of delivery process
