NFC Network RFID Reader

Description  

This network reader a cost effective alternative to traditional access control solutions. The fast Ethernet interface (10BASE-T / 100BASE-TX) allows an easy integration into IP-based network infrastructures with CAT-5 cables.   It combines the functions of an intelligent controller with Ethernet interface and a RFID smart card reader in one compact device.  This reader supports passive transponder according to ISO / IEC 14443 type A and type B, ISO / IEC 15693 and communicates with NFC devices (ISO / IEC 18092).

Key Technical Data

• Dimensions: 84 mm x 84 mm x 22 mm  
• Housing: Plastic ASA / Front panel: acrylic glass
• Weight approx. 150 g
• Interface: TCP/IP
• Protection class: IP 54
• RF Transmitting power 250 mW ± 2 dB
• Supply voltage Power over Ethernet (PoE), IEEE802.3af; alternative: ext. power supply 24V up to 48 V DC ± 10%
• Current consumption maximum 2.6 W (IEEE802.3af  Powered Devices Class: 1)
• Operating frequency 13.56 MHz
• Supported transponders: ISO 14443-A, ISO 14443-B, ISO 15693, and NFC tags  
  • Mifare® classic (mini,1k,4k), Mifare® UltraLight, Mifare® DESfire, Smart MX, my-dTM proximity, my-dTM move
  • I-CODE SLI, my-dTM vicinity, STM LRI512, Tag-it HFI, etc.
  • NFC Type 1, 2 and 4
• Reading / Writing distance typical: 3 up to 5 cm
• Operating temperature:  –20 °C up to +55 °C
• Storage temperature: –40 °C up to +85 °C
• Relative air humidity: 95 % (non condensing)
• Standard conformity:
  • Radio license: Europe EN 300 330   USA FCC 47 CFR Part 15   Canada IC RSS-GEN, RSS-210, RSS-212 EMC EN 300 489
  • Safety   Low voltage EN 60950  
  • Human Exposure EN 50364 Environment RoHS-2002/95/EC  WEEE-2002/96/EC