Posts

Tag Master Heavy Duty Active RFID Reader

Description  

The Tag Master LR-6HD is an active RFID reader for heavy-duty.  It is an all in one reader with integrated antenna.  This RFID reader is developed for applications where a higher environmental classification is required, for example in railway solutions where track-side mounting is required.  The heavy-duty readers are robust and designed for very tough conditions. The readers are designed to withstand vibrations as well as being highly resistant to electrical interference.  Heavy-duty also means that the readers are built to withstand climatic conditions such as rain, ice and high or low temperatures.

The reader’s specification has been matched to meet the needs of the rail industry and the LR-6HD can identify ID-tags at passage speeds of up to 400 km/h and up to 10 metres reading distance.

Key Technical Data

  • Dimensions: 290 x 165 x 55 mm Dimensions 290 x 165 x 56 mm (11.42 x 6.50 x 2.21 inch)
  • Computer Interface: RS232, RS485, Wiegand/Magstripe, Ethernet (TCP/IP)
  • RF Interface: Internal antenna
  • Power supply: 10–30 VDC Power supply 10 to 30 VDC (NOM 24 V)
  • Power consumption 5 W (max 15 W) Power consumption 5 W (max 15 W)
  • Operating frequency:  2.435 to 2.465 GHz Read range up to 10 metres* (33 ft)
  • RF Power Output: Output power 10 mW
  • Reading distance typical: Up to 10 metres
  • Encapsulation: IP66
  • Operating temperature: -40°C (-40°F) to +70°C (+158°F)
  • Standard conformity: CE Certificate according to R&TTE-Directive 1999/5/EC, FCC M39LRXX +applicable railway standards

Active RFID Tag (Mark Tag MeM)

Description  

The MarkTag MeM is an active RFID tag which is the ideal choice of ID-tag for applications when a wider and longer reading range is needed.  The active RFID Tag has a great angel of reading by using a state of the art antenna technology.   

This RFID tag is a read-only 2.45 GHz RFID tag.  Each RFID tag has its own ID-tag which has a pre-programmed 8-digit unique identity code. It also has a large 32 bit checksum that virtually eliminates the risk of incorrect tag reads even with several ID-tags identified simultaneously.  The RFID tag is battery powered, keeping the tag alert, for instantaneous response to the reader signal. The lifetime of the RFID tag is fully predictable +6 years, independent of the number of times it is being identified

Key Technical Data

  • Dimensions:  41x41x13 mm (1.61×1.61×0.51 in)
  • Operating frequencies 2.435 GHz to 2.465 GHz
  • Read range: Up to 10 metres up to 14 metres with LR-6 XL reader (46ft)
  • Battery lifetime:  Typically +6 years. Lifetime is dependent on temperature.
  • Operating temperatures: Operating temperatures -20 °C (-4 °F) to +70 °C (+158 °F)
  • Encapsulation:  Material Robust polymers
  • Battery lifetime: Typically +6 years. Lifetime is dependent on temperature
  • Colour:  Two tones of grey
  • Ingress Protection: IP 54
  • Certifications:
    • Certifications CE Certificate according to R&TTE-Directive 1999/5 /EC, Annex IV, Health: 1999/519/EC, EL.Safety: EN 60950, EMC: EN 301489-3:2000, Radio: EN 300 440:2001 RoHs
Mark Tag MeM