ECCO+ is a hybrid AutoID technology which provides not only reading of barcode but also RFID technology. The device is available in the following variants:
pure 1D/2D barcode scanner
pure HF/UHF reader
hybrid solution combining barcode and RFID
With common communication interfaces like USB, Bluetooth and Wifi, this mobile reader can be used in different fields of applications such as logistics, asset tracking, healthcare and etc.
Key Technical Data
CPU: ARM9, 400 Mhz
Memory: 128 MB RAM, 1 GB Flash
Programming: ECLIPSE IDE for C/C++
Support OS: Win 7/Win 8/Win 10 (32 and 64 bits)/ Server 2003/2000
The Tag Master LR-6HD is an active RFID reader for heavy-duty. It is an all in one reader with integrated antenna. This RFID reader is developed for applications where a higher environmental classification is required, for example in railway solutions where track-side mounting is required. The heavy-duty readers are robust and designed for very tough conditions. The readers are designed to withstand vibrations as well as being highly resistant to electrical interference. Heavy-duty also means that the readers are built to withstand climatic conditions such as rain, ice and high or low temperatures.
The reader’s specification has been matched to meet the needs of the rail industry and the LR-6HD can identify ID-tags at passage speeds of up to 400 km/h and up to 10 metres reading distance.
Key Technical Data
Dimensions: 290 x 165 x 55 mm Dimensions 290 x 165 x 56 mm (11.42 x 6.50 x 2.21 inch)
Power supply: 10–30 VDC Power supply 10 to 30 VDC (NOM 24 V)
Power consumption 5 W (max 15 W) Power consumption 5 W (max 15 W)
Operating frequency: 2.435 to 2.465 GHz Read range up to 10 metres* (33 ft)
RF Power Output: Output power 10 mW
Reading distance typical: Up to 10 metres
Encapsulation: IP66
Operating temperature: -40°C (-40°F) to +70°C (+158°F)
Standard conformity: CE Certificate according to R&TTE-Directive 1999/5/EC, FCC M39LRXX +applicable railway standards
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-28 13:45:262020-09-18 08:52:13Tag Master Heavy Duty Active RFID Reader
Identify has proposed the on-metal outdoor RFID label for gas cylinder tracking. After using for several months, the label has been proved to be able to in outdoor environment successfully.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-27 11:22:482020-09-18 08:53:52Proven usage, on metal outdoor RFID label
This RFID antenna is specially designed for forlift application. It comes in compact size with high robustness and endurance while delivering high reading ability.
The MarkTag MeM is an active RFID tag which is the ideal choice of ID-tag for applications when a wider and longer reading range is needed. The active RFID Tag has a great angel of reading by using a state of the art antenna technology.
This RFID tag is a read-only 2.45 GHz RFID tag. Each RFID tag has its own ID-tag which has a pre-programmed 8-digit unique identity code. It also has a large 32 bit checksum that virtually eliminates the risk of incorrect tag reads even with several ID-tags identified simultaneously. The RFID tag is battery powered, keeping the tag alert, for instantaneous response to the reader signal. The lifetime of the RFID tag is fully predictable +6 years, independent of the number of times it is being identified
Key Technical Data
Dimensions: 41x41x13 mm (1.61×1.61×0.51 in)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range: Up to 10 metres up to 14 metres with LR-6 XL reader (46ft)
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures: Operating temperatures -20 °C (-4 °F) to +70 °C (+158 °F)
Encapsulation: Material Robust polymers
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature
Colour: Two tones of grey
Ingress Protection: IP 54
Certifications:
Certifications CE Certificate according to R&TTE-Directive 1999/5 /EC, Annex IV, Health: 1999/519/EC, EL.Safety: EN 60950, EMC: EN 301489-3:2000, Radio: EN 300 440:2001 RoHs
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-24 11:37:282020-09-18 08:57:19Active RFID Tag (Mark Tag MeM)
The MarkTag HD is an active RFID tag which is designed for our door environement. This RFID tag is the standard choice for applications where there is no need to write information to the ID-tag. The MarkTag Outdoor is made for outside mounting on a vehicle/object and can be mounted directly on to metal surfaces. The RFID tag is robust, vibration resistant, waterproof and UV stable.
The RFID tag has a pre-programmed 8-digit unique identity code from factory that comprises a 32 bit checksum for automatic verification. This eliminates substitution errors even with several ID-tags identified simultaneously. . The lifetime of the active RFID tag is predictable +6 years independently to the number of reads.
Key Technical Data
Dimensions 91 x 59 x 8 mm (3.6 x 2.3 x 0.3 inch)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range : Up to 10 metres
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures -20°C (-4°F) to +85°C (+185°F)
Encapsulation: Encapsulation Robust Polymer
Colour: Black
Ingress Protection: IP67
Certifications:
CE Certificate according to R&TTE-Directive 1999/5/EC, Annex IV, Health: 1999/519/EC, El.Safety: EN 60950, EMC: EN 301489-3:2000, Radio EN 300 440:2001
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-20 22:49:452020-09-18 08:58:48Active RFID Tag (Mark Tag HD)
The MarkTag Classic is an active RFID tag which is designed to work with Tag Master LR6 active RFID reader. This RFID tag is the ideal choice of ID-tag in parking and access control applications that ask for hands-free access. The MarkTag Classic is a read-only 2.45 GHz RFID tag. Each ID-tag has a pre-programmed 8-digit unique identity code. A 32 bit checksum ensures a very safe read. In combination with a random reflection of the RFID reader signal, this eliminates substitution errors even with several ID-tags identified simultaneously. The RFID tag is battery powered, keeping the ID-tag alert, for instantaneous reflection of the reader signal. The lifetime of the active RFID tag is predictable +6 years independently to the number of reads.
Key Technical Data
Dimensions 86 x 54 x 3 mm (3.39 x 1.612.13 x 0.12 inch)
Operating frequencies 2.435 GHz to 2.465 GHz
Read range : Up to 6 metres with LR-6 reader
Battery lifetime: Typically +6 years. Lifetime is dependent on temperature.
Operating temperatures -20°C (-4°F) to +85°C (+185°F)
Encapsulation: IP54
Colour: Grey scale
Certifications:
CE Certificate according to R&TTE-Directive 1999/5/EC, Annex IV, Health: 1999/519/EC, El.Safety: EN 60950, EMC: EN 301489-3:2000, Radio EN 300 440:2001
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-08-18 11:50:262020-09-18 09:00:14Active RFID Tag (Mark Tag Classic)
The word “Real time location tracking (RTLS)” was created to describe and differentiate the technology that not only provided the automatic identification capabilities of active RFID tags, but also added the ability to view the location of the tagged objects. It is a system used to automatically identify and track the location of objects or people in real time, usually within a building or other contained area. Wireless RFID tags are attached to objects or worn by people, and fixed reference points receive wireless signals from RFID tags to determine their location.
How it works
RTLS solutions comprise active RFID tags, technology platforms (Wi-Fi, Infrared, Bluetooth Low Energy, Low Frequency, ultrasound and others), hardware infrastructure (readers & exciters) and other components (servers, middleware & end-user software). RTLS tag which is active RFID tag is affixed to mobile items to be tracked. RTLS reference points, which can be either transmitters or receivers, are spaced throughout a building (or similar area of interest) to provide the desired tag coverage.
ID signals from a RFID tag is received by a multiplicity of readers and a position is estimated using one or more locating algorithms, such as Angle of Arrival (AoA), Angle of Departure (AoD), Time of arrival (ToA), Multilateration (Time difference of arrival) (TDoA) or etc. Localization with multiple reference points requires that distances between reference points in the network in order to precisely locate a RFID tag, and the determination of the location
Real Time Location Systems for Personnel and Assets
Identify has partnered with Extronics to provide real time location system for personnel and asset in hazardous area. The system consists of
Active RFID tags
Tag Exciters
Software
Wireless access points
Active RFID tags
Active RFID tags contain their own batteries and transmit their ID signal at regular intervals, without needing external prompting. The tags are certified with ATEX and IECEx so they can be used in hazardous area.
Tag Exciters
Tag exciters use LF to trigger tags as they pass through, go into or out of a tightly defined area (e.g. a chokepoint, entrance point, room, sub-room, bridge, stairwell). The tag exciters help our RTLS pinpoint the exact location of people or assets, and even raise alarms if needed. The exciters are also available in ATEX, IECEx, and North American hazardous area certified models
Software
The MobileView visibility platform enables you to track, locate, monitor, and manage your assets and personnel from a single platform. With purpose-built applications for personnel and asset management, evacuation monitoring, and condition monitoring is the industry’s most advanced end-user application for Real-time Visibility Solutions,
Wireless access points
We employs the standard Wi-Fi networks as a core infrastructure to pass wireless signals from tags to the network. The same Wi-Fi networks can also be used for other Internet of Things solutions, such as data and voice services.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-07-29 13:02:492020-07-29 13:02:53Active RFID: Real Time Location Tracking (RTLs)
Presently, many universities have worked with banks to use of ATM/debit cards as student ID cards. The current student ID in Thai-Nichi Institute of Technology is also ATM card which is issued by Bank of Ayudhaya. Since the ATM card is embedded with RFID technology, Identify, being an RFID expert, has worked with Bank of Ayudhaya to maximize the usage of this RFID card.
During Covit-19 pandemic, it is essential to record the timeline of individual student without any contact. One key advantage of RFID technology is contactless ability. Therefore, we have developed a self class attendance checking station. The station is embedded with RFID reader and bar code scanner. Students just simply place their student RFID cards on the station. The station will automatically capture student ID which is in bar code format. Simultaneously, the station will also record their RFID UIDs in order to ensure that this record is processed with the student card. With the benefits of RFID technology, the station can totally eliminate any contact activity in order to Covit-19 contamination.
http://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.png00Wirote Ngamsukkasamesrihttp://www.id.co.th/wp-content/uploads/2019/01/logo-300x101.pngWirote Ngamsukkasamesri2020-07-11 22:27:022020-07-13 07:43:14Using RFID technology to reduce Covit-19 contamination